Screwing machine VMV type with pneumatic control

Description

Composed of :

One plate.

Three guide pins sliding along an axis.

A box with two levers for height adjustment.

The screwing tool receives a screwing ring.

Several screwing rings of different diameters may be necessary according to the screw cap diameter.

Screwing machine supplied with only one screwing ring.

USE

After adjustment of the height and centring of the flask, place, on the plate, a flask with its screw cap.

The ground pedal enables to activate a pneumatic cylinder which controls the descent of the screwing machine.

The adjustment of the screwing torque is carried out on the screwing head.

The screwing head completes a rotation when it pushes on the cap to be screwed.

SCREW CAP DIAMETER : from 11 mm to 20 mm

FLASKS HEIGHT: from 30 mm to 350 mm

DIMENSIONS OF THE SCREWING MACHINE

Height : 600 mm

Width : 250 mm

Length : 350 mm

Weight : about 8 Kg

 

RATE PER HOUR : 800 to 1200 screwings

 

This equipment can be placed on any working surface thanks to four adjustable supporting feet in rubber.

 

COMPRESSED AIR NEEDED : 7 to 9 bars correctly lubricated.

COMPRESSED AIR CONSUMPTION : 0,3 L per screwing.